LNW-6 Standard Model PLUS! Dynamic Weighing 

  • Many of the Same Features as the Standard Model
  • Improved Accuracy over standard model
  • Front panel Keypad 
  • 0.5% to 1% Accuracy on most Equipment
  • Count by 1, 2, 5,10, 20, 50
  • Capacity to 75K & decimal tons
  • Total Accumulation
  • Load Setpoint
  • RS232 Options including Tape  Printer 
  • Manual
  • Quick Cal Guide sheet
  • PLUS! Addendum - Installion info
  • Flyer
HOME   LNW-5     LNW-6     Other Models     Manuals     Support     Contact Us     About Us
Introduction to the LNW-6 PLUS!

The LIFT-N-WEIGH 6 PLUS! forklift scales and loader scales operate on the principal that there is a direct correlation between the pressure in the cylinder and weight on the forks. The PLUS! model uses the standard Indicator, but also has a Electricaly controlled solenoid remotely mounted. A pressure transducer in the manifold measures the hydraulic pressure in the primary lift cylinder as it is dynamically lowered through a pressure compensated flow control valve. to an electronic signal which is displayed as weight on the forks.
  Installation of your lift truck scale consists of mounting the weigh meter, pre-calibrated to customer's specs, at a location that is convenient and easy for the operator to read. Installation consists of installing a 1/4" NPT female fitting (not included with the scale) in the

Final Calibration is performed on the vehicle. The LNW-6 is Zeroed with the Front panel Zero button and then calibrated using a known weight and using the Front panel Menu button to enter the calibration mode. .

Plus Model
Capacity: 1000 - 500,000 (1000 x 1 - 10000 x 50)
Grads: 1, 2, 5, 10, 20, 50
   plus decimal Tons
Power: 12 VDC to 50 VDC External Filter/Regulators provided for protection
Display: 6 Digit LCD (0.70")
Controls: Remote Pushbutton, ON/OFF switch; Front Panel buttons
Heavy Duty Cast Aluminum Housing
Dimensions: Case - 5.75" W x 3.75" H x 3.5" D Overall - 6.75" W x 6" H x 4.75" D  
Accuracy: 0.5 % to 2% of capacity depending on the Mechanical condition of the vehicle and method of operation by the user (Some users report accuracy to 0.2%)
Pacific Scale Co., Lift-N-Weigh Mfg. Dept Features
50 years Hydraulic Scale experience
One (1) year warranty on our products.
Five (5) year warranty on our Main board electronics.
Toll Free Telephone support 800-537-1886 ext. 109
How to contact us
Lift-N-Weigh Mfg. is a dept. of the Pacific Scale Co., Inc. If you would like more information you can use our Contact Form or call 800-537-1886

1997-2012 PC Consulting. All rights reserved