LNW-6 Standard Model

  • Front panel Keypad 
  • 1% to 2% Accuracy
  • Count by 1, 2, 5,10, 20, 50
  • Capacity to 75K & decimal tons
  • Total Accumulation
  • Load Setpoint
  • RS232 Options including Tape  Printer 
  • Manual
  • Quick Cal Guide sheet
  • Flyer
HOME     LNW-5     LNW-6 PLUS!     Other Models     Manuals     Support     Contact Us     About Us
Introduction to the LNW-6

The LIFT-N-WEIGH 6 forklift scales and loader scales operate on the principal that there is a direct correlation between the pressure in the cylinder and weight on the forks. A pressure transducer in the instrument changes the hydraulic pressure in the primary lift cylinder to an electronic signal which is displayed as weight on the forks.
  Installation of your lift truck scale consists of mounting the weigh meter, pre-calibrated to customer's specs, at a location that is convenient and easy for the operator to read. Installation consists of installing a 1/4" NPT female fitting (not included with the scale) in the hydraulic line between the control valve and the primary lift cylinder and connecting the power cord to the battery. The 6' hose furnished with the scale has, at each end, a male 1/4" pipe thread fitting. One end screws into the fitting customer furnished and other end into the swivel elbow on back of LNW.

Final Calibration is performed on the vehicle. The LNW-6 is Zeroed with the Front panel Zero button and then calibrated using a known weight and using the Front panel Menu button to enter the calibration mode. .

Features

Standard Model
Capacity: 1000 - 500,000 (1000 x 1 - 10000 x 50)
Grads: 1, 2, 5, 10, 20, 50
   plus decimal Tons
Power: 12 VDC to 50 VDC External Filter/Regulators provided for protection
Display: 6 Digit LCD (0.70")
    Backlight
Controls: Remote Pushbutton, ON/OFF switch; Front Panel buttons
Heavy Duty Cast Aluminum Housing
Dimensions: Case - 5.75" W x 3.75" H x 3.5" D Overall - 6.75" W x 6" H x 4.75" D  
Accuracy: 1% to 2% of capacity depending on the Mechanical condition of the vehicle and method of operation by the user

Pacific Scale Co., Lift-N-Weigh Mfg. Dept Features
50 years Hydraulic Scale experience
One (1) year warranty on our products.
Five (5) year warranty on our Main board electronics.
Toll Free Telephone support 800-537-1886 ext. 109
How to contact us
Lift-N-Weigh Mfg. is a dept. of the Pacific Scale Co., Inc. If you would like more information you can use our Contact Form or call 800-537-1886

2012 PC Consulting. All rights reserved