MOUNTED DIRECTLY ON YOUR FORKLIFT THE LIFT-N-WEIGH IS ALWAYS THERE WHEN NEEDED, SINCE 1982!

  • USE FOR CHECKING FREIGHT IN AND OUT
  • LOADING TRUCKS OR BOXCARS
  • INVENTORY PALLETIZED PRODUCTS
  • MONITORING BULK MATERIAL USAGE
  • A SAFE LOAD INDICATOR
  • HEAVY DUTY CAST ALUMINUM CASE
  • 5 YEAR WARRANTY ON MAIN BOARD ELECTRONICS
  • OPEN RETURN POLICY IF NOT SATISFIED
LNW-5    LNW-6    LNW-6 PLUS!    Other Models    Manuals    Support    Contact Us    About Us
Introduction
The LIFT-N-WEIGH series of forklift scales and loader scales operate on the principal that there is a direct correlation between the pressure in the cylinder and weight on the forks. A pressure transducer in the instrument changes the hydraulic pressure in the primary lift cylinder to an electronic signal which is displayed as weight on the forks.
  Installation of your lift truck scale consists of mounting the weigh meter, pre-calibrated to customer's specs, at a location that is convenient and easy for the operator to read. Installation consists of installing a 1/4" NPT female fitting (not included with the scale) in the hydraulic line between the control valve and the primary lift cylinder and connecting the power cord to the battery. The 6' hose furnished with the scale has, at each end, a male 1/4" pipe thread fitting. One end screws into the fitting customer furnished and other end into the swivel elbow on back of LNW.
Features

LNW-5

List $1400

LNW-6

List $1799

LNW-6 Plus!

List $2,230

Basic Model
Capacity: Up to 199,900
Graduations: by 10 to 19,000
                by 100 to 199,900
Power: 12 VDC to 50 VDC External Filter/Regulators provided for protection
Display: 6 Digit LCD (0.70")
   White LED Backlight
Controls: Zero Knob, ON/OFF switch; Internal Span Pot
            
Heavy Duty Cast Aluminum Housing
Dimensions: Case - 5.75" W x 3.75" H x 3.5" D Overall - 6.75" W x 6" H x 4.75" D  
Accuracy: 1% to 2% of capacity depending on the Mechanical condition of the vehicle and method of operation by the user
Standard Model
Capacity: Adjustable to match the vehicle up to 500,000 Lbs. Higher capacities using decimal Tons. 
Graduations: 1,2,5,20,20,50 lbs. and decimal tons
Front Panel LB/KG button, Lockable Via Setup mode.
Power: 12 VDC to 50 VDC External Filter/Regulators provided for protection
Display: 8 Digit LCD (0.70")
Green Backlight for High visibility
Controls: Remote Accum, ON/OFF switch; Six (6) Front Panel buttons; Front Panel Calibration
Same Heavy Duty Aluminum Casting as our Basic Model
Dimensions: Same as Basic Model
Total and Load Setpoints to operate Display warnings, "TOT OVR" & "WT OVR"
Options: RS232 output for Printer or computer
Internal Timers allow for more consistent weight readings.
Plus Dynamic!
Our Standard Model LNW-6 PLUS! Dynamic Weighing
Adding the PLUS! Hydraulic manifold to our Standard model allows for Dynamic Weighing which improves weighing accuracy and eliminates differences between operators
Same Features as our Standard Model LNW-6 but with greater accuracy!
Pacific Scale Co., Lift-N-Weigh Mfg. Dept Features
50 years Hydraulic Scale experience
One (1) year warranty on our products.
Five (5) year warranty on our Main board electronics.
Toll Free Telephone support 800-537-1886 ext. 109
How to contact us
Lift-N-Weigh Mfg. is a dept. of the Pacific Scale Co., Inc. If you would like more information you can use our Contact Form or call 800-537-1886

2012 PC Consulting. All rights reserved